Others

Sort By:  
  • IC MCP3008
    This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. Uses SPI so only 4 pins are required.  this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.

    Data Sheet here

    Features :
    • 10-bit resolution
    • Eight single-ended channels
    • SPI interface
    • ±1 LSB DNL
    • ±1 LSB INL
    • 200 ksps sample rate at 5V
    • -40 to +85°C temperature range

     
    Add to Cart
    Rp.85,000
  • Waterproof DS18B20 kit (DFROBOT)
    Specification :
    • Operating voltage: 3.0~ 5.5V
    • ±0.5°C Accuracy from -10°C to +85°C
    • Usable temperature range: -55 to 125°C (-67°F to +257°F)
    • 9 to 12 bit selectable resolution
    • Uses 1-Wire interface- requires only one digital pin for communication
    • Unique 64 bit ID burned into chip
    • Multiple sensors can share one pin
    • Temperature-limit alarm system
    • Query time is less than 750ms
    • 3 wires interface:
      • Type A
        • Red wire - VCC
        • Black wire - GND
        • Yellow wire - DATA
      • Type B 
        • Red wire - VCC
        • Yellow wire - GND
        • Green wire - DATA
    • Stainless steel tube 6mm diameter by 35mm(1.34") long
    • Cable diameter: 4mm(0.16")
    • Length: 90cm(35.43")
    Source : Wiki Doc
    Add to Cart
    Rp.186,000
  • Lattepanda 2GB RAM (32GB eMMC - Storage)
    Processor: Intel Cherry Trail Z8300 Quad Core 1.8GHz
    Operation System: Pre-installed full edition of Windows 10
    Ram: 2GB DDR3L
    Storage Capability: 32GB
    GPU: Intel HD Graphics, 12 EUs @200-500 Mhz, single-channel memory
    One USB3.0 port and two USB 2.0 ports
    WiFi and Bluetooth 4.0
    Built-in Arduino Co-processor: ATmega32u4
    Video output: HDMI and MIPI-DSI
    Onboard touch panel overlay connector
    Supports 100Mbps Ethernet
    GPIO:
    6 GPIOs from Cherry Trail processor
    20 GPIOs from Arduino Leonardo
    6 Plug and play Gravity sensor connectors
    Power: 5v/2A
    Dimension of board: 88 * 70 mm/ 3.46 * 2.76 inches
    Packing Size: 110 * 94 * 30 mm/4.33 * 3.70 * 1.18 inches
    N.W.: 55g
    G.W.: 100g

    OS : - Windows 7/8/10 Desktop
           - Ubuntu x86
           - Linux X86
    Package :
    - 1pcs x attepanda Mainboard
    - 1pcs x Wifi antenna


    Note:
    This product requires a power supply of 5V @ 2A to work properly using a quality USB cable. An iPad power supply is ideal.

    *) windows 10 tidak terinstall
    Add to Cart
    Rp.1,850,000
  • RPI Power Pack (Ver 1.1 for Raspberry Pi B+ , 2B, 3B )
    Features :
    • A power module especially designed for Raspberry Pi, which enables using the Raspberry Pi in a moveable manner
    • Battery capacity: 3800mAH (maximum); Output current: 1.8A
    • Output voltage (no load): 5.1V ± 0.1V
    • Double USB outputs, one for the Raspberry Pi, the other for the embedded LCD screen
    • Coming with fastening standoffs, screws and nut, so you can stack the Raspberry Pi board on the module
    Technical Details
    Introduction
    The power module is designed for the Raspberry Pi 3 Model B specially, allowing the master board to work offline for up to 9 hours. It's not only supplying for Raspberry Pi; this board has 2 USB type-A ports – one supplies power for the Raspberry Pi and the other for the embedded LCD screen.
    The module integrates a Li-ion battery charger IC, a boost management chip. And it is developed in strict accordance with the size of the international Raspberry Pi expansion board HAT, using only simple copper standoffs to install multi-layer Raspberry Pi boards.

    Specifications:
    Battery capacity: 3800mAH
    Maximum discharge current: 1.8A
    No-load output voltage: 5.1V ± 0.1V
    Standard charging current/voltage: 1.0A/5.0V
    Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V

    Package Content :
    • Lithium Battery Expansion board (with lithium battery)
    • 4 x Copper standoff
    • 4 x Screw
    • 4 x Nut
    • Power board unit

     
    Add to Cart
    Rp.268,000
  • RASPBERRY PI 3 (Model B)
    Sedikit hal yang perlu diperhatikan :
    • Agar wifi dan BLE berfungsi silahkan upgrade ke kernel os versi 4.1.19 , atau download OS paling baru dari situs rasbpberrypi.org
    • Slot microsd sudah tanpa per jadi pemasangan dan pelepasan tidak perlu ditekan kuat-kuat yang dapat mengakibatkan microsd patah ;-)
    Pemesanan dalam jumlah kuantiti diatas 10 silahkan kontak kami

    Yang baru di Raspberry Pi 3 model B
    • 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
    • Integrated 802.11n wireless LAN and Bluetooth 4.1
    • Complete compatibility with Raspberry Pi 1 and 2

    Processor

    Broadcom BCM2387 chipset, 1.2GHz Quad-Core ARM Cortex-A53.802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)

    GPU

    Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure

    Memory

    1GB LPDDR2

    Operating System

    Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT

    Dimensions

    85 x 56 x 17mm

    Power

    Micro USB socket 5V1, 2.5A


    Source here


     
    Add to Cart
    Rp.520,000
  • Raspberry Pi 2 (Model B )

    Raspberry Pi 2 - Model B Technical Specification:

    • Broadcom BCM2836 ARMv7 Quad Core Processor powered Single Board
    • Computer running at 900MHz
    • 1GB RAM
    • 40pin extended GPIO
    • 4 x USB ports
    • 4 pole Stereo output and Composite video port
    • Full size HDMI
    • CSI camera port for connecting the Raspberry Pi camera
    • DSI display port for connecting the Raspberry Pi touch screen display
    • Micro SD port for loading your operating system and storing data
    • Micro USB power source

    Raspberry Pi 2 - Model B Features:

    • 6x Faster - Broadcom BCM2836 ARMv7 Quad Core Processor powered Single Board Computer running at 900MHz
    • Double Memory - 1GB RAM so you can now run bigger and more powerful applications
    • Identical board layout and footprint as the Model B+, so all cases and 3rd party add-on boards designed for the Model B+ will be fully compatible.
    • Fully HAT compatible
    • 40pin extended GPIO to enhance your “real world” projects. GPIO is 100% compatible with the Model B+ and A+ boards. First 26 pins are identical to the Model A and Model B boards to provide full backward compatibility across all boards.
    • Connect a Raspberry Pi camera and touch screen display (each sold separately)
    • Stream and watch Hi-definition video output at 1080P
    • Micro SD slot for storing information and loading your operating systems.
    • Advanced power management:
    • You can now provide up to 1.2 Amp to the USB ports – enabling you to
    • connect more power hungry USB devices directly to the Raspberry PI. (This
    • feature requires a 2Amp micro USB Power Supply)
    • 10/100 Ethernet Port to quickly connect the Raspberry Pi to the Internet
    • Combined 4-pole jack for connecting your stereo audio out and composite video out
    * Buatan CIna (PRC) atau UK ?
    Kami informasikan bahwa semua raspberry pi yang kami jual di order dari Element14 dan RS Component Singapura. yang menginduk ke UK jadi kami tidak bisa memastikan apakah yang dikirim dari sana yang produksi cina atau uk , kadang kami dapat yang UK dan yang Cina , tapi kami bisa pastikan bahwa yng kami jual adalah original sesuai standard dari raspberrypi foundation.

    * Ready Stock buatan RS Component dan Element 14 (update 25 Feb 2016)
    Beri catatan mau dikirim yang mana , jika tidak kami akan ambilkan dari stock yang terbanyak.


    Perbedaan terletak pada header LVDS camera dan display serta kotak kemasan Raspberry pi. ( lihat pada gambar )
    1. RS Component : Made in UK, Kotak warna hijau putih dan header camera serta display putih.
    2. Element 14  : Made in UK / CN , Kotak warna putih merah dan header camera serta display hitam
    Dari segi kualitas semua relatif sama karena sama-sama mengacu pada standard dari Raspberry Pi foundation ;-). 


     
    Out Of Stock
    Rp.600,000
  • Arduberry Raspberry Pi
    The Arduberry connects to the Raspberry Pi (all versions) and allows you to use the hundreds of shields and sensors already available for the Arduino with the ease of writing programs for the Raspberry Pi — in Python, Scratch and other higher level languages. 
    Support Raspberry pi 2 model B check here


    Sources : here

     
    Out Of Stock
    Rp.425,000
  • UP board x86 1GB + 16 GB eMMC
    Processor Intel Atom x5-z8350 Processor (2M Cache, 1.44 GHz up to 1.92 GHz) CPU with 64 bit architecture; Quad Core
    Graphics Intel HD 400 Graphics, 12 EU GEN 8, up to 500MHz Support DX*11.1/12, Open GL*42, Open CL* 1.2 OGL ES3.0, H.264, HEVC(decode), VP8
    I/O HDMI 1.4b
    12S audio port
    Camera CSI (4 Mega pixel)
    USB 4 x USB 2.0
    2 x USB 2.0 pin header (10 pins in total)
    1 x USB 3.0 OTG
    Expansion 40 pin General Purpose bus, supported by Altera Max V. ADC 8-bit@188ksos
    RTC Yes
    Power 5V DC-in @ 4A 5.5/2.1mm jack
    Dimension 3.37x 2.22( 85.6mm x 56.5mm)
    Operating Humidity 10%~80%RH non-condensing
    Memory 1GB DDR3L-1600
    Storage 16GB eMMC/ 32GB/ 64GB
    Display Interface DSI/ eDP
    Ethernet 1 x Gb Ethernet (full speed) RJ-45
    OS support Microsoft Windows 10 full version, Linux (ubilinux, Ubuntu, Yocto), Android Marshmallow
    Operating Temperature 32F ~ 140F (0C ~ 60C)
    certificate CE/FCC Class A, RoHS Complaint Microsoft Azure certified

    isi paket :
    - Fan
    - Heatsink
    - Baterai rtc

    source www•upboard•org
    Add to Cart
    Rp.1,500,000
  • UP board x86 2GB + 16 GB eMMC
    Processor Intel Atom x5-z8350 Processor (2M Cache, 1.44 GHz up to 1.92 GHz) CPU with 64 bit architecture; Quad Core
    Graphics Intel HD 400 Graphics, 12 EU GEN 8, up to 500MHz Support DX*11.1/12, Open GL*42, Open CL* 1.2 OGL ES3.0, H.264, HEVC(decode), VP8
    I/O HDMI 1.4b
    12S audio port
    Camera CSI (4 Mega pixel)
    USB 4 x USB 2.0
    2 x USB 2.0 pin header (10 pins in total)
    1 x USB 3.0 OTG
    Expansion 40 pin General Purpose bus, supported by Altera Max V. ADC 8-bit@188ksos
    RTC Yes
    Power 5V DC-in @ 4A 5.5/2.1mm jack
    Dimension 3.37x 2.22( 85.6mm x 56.5mm)
    Operating Humidity 10%~80%RH non-condensing
    Memory 2GB DDR3L-1600
    Storage 16GB eMMC/ 32GB/ 64GB
    Display Interface DSI/ eDP
    Ethernet 1 x Gb Ethernet (full speed) RJ-45
    OS support Microsoft Windows 10 full version, Linux (ubilinux, Ubuntu, Yocto), Android Marshmallow
    Operating Temperature 32F ~ 140F (0C ~ 60C)
    certificate CE/FCC Class A, RoHS Complaint Microsoft Azure certified

    isi paket :
    - Heatsink dua sisi ( bagian atas dan sisi bawah board )
    - Baterai rtc

    source www•upboard•org
    Add to Cart
    Rp.1,750,000
  • Khadas Vim An Open Source (TV Box AP6212 2G + 8G eMMC)
    System: Android 6.0,Buildroot,OpenELEC,Ubuntu
    CPU: Amlogic S905X
    Core: Quad Core
    GPU: Mali-450
    RAM: 2G
    RAM Type: DDR3
    ROM: 8G
    Max. Extended Capacity: 64G
    Maximum External Hard Drives Capacity: 64GB
    Color: Transparent
    Decoder Format: H.263,H.264,H.265,HD MPEG4
    Video format: AVC,AVI,DAT,H.264,H.265,MKV,MPEG-4,REAL MEDIA,VP9
    Audio format: AAC,FLAC,MP3,OGG,RM,WMA
    Photo Format: BMP,GIF,JPEG,JPG,TIFF
    Support 5.1 Surround Sound Output: Yes
    5G WiFi: Yes
    WIFI: 802.11b/g/n
    Bluetooth: Support
    Power Supply: Charge Adapter,USB Port
    Interface: HDMI,LAN,TF card,Type-C,USB2.0
    Language: Multi-language
    DVD Support: No
    HDMI Version: 2.0
    Other Functions: DLNA,Miracast
    External Subtitle Supported: Yes
    HDMI Function: CEC
    Power Comsumption: 1.4W
    RJ45 Port Speed: 100Mbps
    System Bit: 64Bit
    WiFi Chip: AP6212
    KODI Pre-installed: Yes
    KODI Version: V17.0 Krypton

    Package Contents: 1 x Khadas Vim TV Box, 1 x USB-C Cable , 1 x Acrylic layer case
    Add to Cart
    Rp.880,000
  • NRF24L01
    • NRF24L01 + onboard 2.4GHz Antenna Wireless Transceiver Module
    • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications
    • 125 Channels.
    • Multi-point communication and frequency hopping to meet the communication needs
    • Built-in hardware CRC error detection,
    • Multipoint communication address control
    • Standard DIP Pitch Interface for embedded applications
    • Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
    • Built-in 2.4GHz antenna
    • Color: Black
    Add to Cart
    Rp.28,000
  • WEMOS D1 (R2)
    The D1 R2 is a mini wifi board based on the ESP-8266EX.
    • 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except for D0)
    • 1 analog input(3.3V max input)
    • Micro USB connection
    • Power jack, 9-24V power input.
    • Compatible with Arduino
    • Compatible with nodemcu
    sources via wemos.cc
    Add to Cart
    Rp.160,000
  • GPS Module Ublox ( NEO-6-MV2 )

    Description

    • GPS modules NEO-6M, 3V-5V power supply Universal
    • Model: GY-GPS6MV2
    • Destined module with ceramic antenna, signal super
    • Save the configuration parameter data EEPROM Down
    • With data backup battery
    • There are LED signal indicator
    • Antenna size 25 * 25mm
    • Module size 25mm * 35mm
    • Installation aperture 3mm
    • Default Baud Rate: 9600
    • Compatible with various flight control modules that provide GPS computer test software


    Package Content

    • 1 x GY-NEO6MV2 New GPS Module
    Add to Cart
    Rp.280,000
  • CHIP (Allwinner R8 Cortex A8 1GHz )

    C.H.I.P specifications:

    • SoC – Allwinner R8 Cortex A8 processor @ 1 GHz with Mali-400 GPU (Compatible with Allwinner A13)
    • System Memory – 512 MB RAM
    • Storage – 4GB NAND flash
    • Connectivity – 802.11 b/g/n Wi-Fi + Bluetooth 4.0
    • Video Output – 3.5mm jack for composite video and audio (HDMI and VGA available via adapters)
    • USB – 1x USB host port, 1x micro USB OTG port
    • Two expansion headers
    • Power – 5V via micro USB OTG or battery
    • Dimensions – 60 x 40 m
    Package list :
    • 1 x CHIP Board
    • 1 x RCA Cable ( around ~ 20 cm )
    • 1 x CHIP Case
     
    Thank to : C.H.I.P warrio Indonesia
    Out Of Stock
    Rp.285,000
  • Kabel HDMI to HDMI (30 CM)
    Kabel HDMI to HDMI dengan panjang kurang lebih 30 cm
    warna hitam, tipe kabel gepeng
     
    Add to Cart
    Rp.45,000
  • HDMI to HDMI CABLE 2M (DLC-HE60HF)
    • The length 2M
    • Black Color
    • Gold Plate
    • Support Full HD 1080P
    • Ultimate Audio 192/24
    • HDMI Version 1.4A
    Add to Cart
    Rp.65,000
  • Raspberry Pi 3B,2B,B+ Metal Case (Black Aluminum)
    1. Case Size: 3.54inch x 2.51inch
    2. This Tiny protective case is designed specifically for Raspberry Pi 2 Model B and Raspberry Pi B+
    3. Aluminum Alloy made. Durable, Solid as a rock. Small Size and Portable. Ultra Thin with good ventilation and absorb the over heat
    4. Removable Side Panels with easy access to the GPIO port. Easy to assemble and disassemble
    5. Wall Mountable. Access to Micro SD card slot, consumer ports and GSI, camera ports and GPIO pins
    6. Come with screws to fit your Pi inside the case and Rubber feet to stick to the bottom
    Add to Cart
    Rp.175,000
  • Raspberry Pi 3B,2B,B+ Case (ABS + FAN BLACK )
    Package :
    1 x case abs
    1 x fan
    Add to Cart
    Rp.110,000
  • Wifi Bee ESP8266 (DFROBOT)
    SPECIFICATION :
    • Wi-Fi Direct (P2P),soft-AP
    • Built-in TCP/IP protocol stack
    • Built-in low-power 32-bit CPU: can work as an application processor
    • Support WPA WPA2/WPA2-PSK encryption
    • Support UART interface
    • Support for TTL serial port to wireless application
    • Working voltage: 3.3V power <240Ma
    • Wireless standard: IEEE802.11b/g/n
    • Frequency: 2.4 GHz
    Sources :
    Note: In order to configure this module, you will need an adapter or Xbee shield that lets you communicate with the module, before you can plug it and use on other modules. Compatible device: Xbee USB adapter (FTDI)
    Add to Cart
    Rp.125,000
  • USB WIFI High Power (150M - W311MA)
    Hardware Features :
    Standards IEEE 802.11b/g/n
    Interface USB 2.0
    Antenna 1x3.5dBi external antenna, 2.4GHz
    Button WPS
    Dimensions (L*W*H)mm 39.1mm17.2mm12.6mm
    LED Displays a solid light while working properly; Flashes while transferring data

    Wireless Features :
    Wireless Speed Up to 150Mbps over 11n
    Frequency 2.4GHZ
    Channel 1~13
    Transmit Power 17dBm (Max)
    Operating Mode Infrastructure, Ad-Hoc
    Software Features
    Security 64-/128-bit WEP
    WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK WPS
    Compatible OS Windows 2000, Windows XP 32-/64-bit, Windows 7 32-/64-bit, Vista 32-/64-bit, Linux , MAC OS
    Others Connect PSP, WII and NDS to Internet and Xlink Kai

    Package Contents W311MA Installation CD
    Temperature Operating Temperature: 0 ~ 45;
    Storage Temperature: -40 ~ 70.
    Humidity Operating Humility:10% ~ 90% RH Non-condensing
    Storage Humility:3% ~ 90% RH Non-condensing
    Related Products W311R, W316R W311U+
    Certificates CE, FCC, RoHS

    chipset : Ralink RT3370
    Out Of Stock
    Rp.100,000
Per Page      1 - 20 of 49
Powered By AbanteCart
TOKOMINIKOMPUTER.COM © 2017
Back to top