Others

Sort By:  
  • RASPBERRY PI 3 (Model B)
    Sedikit hal yang perlu diperhatikan :
    • Agar wifi dan BLE berfungsi silahkan upgrade ke kernel os versi 4.1.19 , atau download OS paling baru dari situs rasbpberrypi.org
    • Slot microsd sudah tanpa per jadi pemasangan dan pelepasan tidak perlu ditekan kuat-kuat yang dapat mengakibatkan microsd patah ;-)
    Pemesanan dalam jumlah kuantiti diatas 10 silahkan kontak kami

    Yang baru di Raspberry Pi 3 model B
    • 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
    • Integrated 802.11n wireless LAN and Bluetooth 4.1
    • Complete compatibility with Raspberry Pi 1 and 2

    Processor

    Broadcom BCM2387 chipset, 1.2GHz Quad-Core ARM Cortex-A53.802.11 b/g/n Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)

    GPU

    Dual Core VideoCore IV® Multimedia Co-Processor. Provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode. Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure

    Memory

    1GB LPDDR2

    Operating System

    Boots from Micro SD card, running a version of the Linux operating system or Windows 10 IoT

    Dimensions

    85 x 56 x 17mm

    Power

    Micro USB socket 5V1, 2.5A


    Source here


     
    Add to Cart
    Rp.585,000
  • PINE64 Playbox Enclosure (ABS White)
    The Case / Enclosure for pine64 lcd with pine64 board
    Out Of Stock
    Rp.220,000
  • Arduino Adaptor
    Seri GM 9020F 09A
    Input : 110V - 220Volt AC
    Output : 9V DC
    Kapasitas Amper : 2A
    Jack : 5mm
    Add to Cart
    Rp.50,000
  • 5 inch LCD HDMI (Touch Screen via USB)

    Feature

    • More than 30fps
    • 800x480 high resolution
    • Suported HDMI cable
    • MINI USB cable to connect with Raspberry pi(Raspberry Pi B+ and Raspberry Pi 2 model B) for touchscreen
    • Back light control to lower power consumption
    • High quality immersion gold surface plating
    • Just for Raspberry Pi
    • no include HDMI cable
    • Touch pen include
    Sources :
    • Remastering Ubuntu here
    • Remastering Raspbian here
    • USB driver for touchscreen here
    • Manual Guide here



     
    Out Of Stock
    Rp.690,000
  • Raspberry Pi 3B,2B,B+ Metal Case (Silver with Fan)
    Metal box - Iron case for Raspberry Pi 3B, 2B adn B+ with Fan silver Color
    Package included :
    • 1pcs metal box
    • 1pcs fan
    Out Of Stock
    Rp.165,000
  • Arduberry Raspberry Pi
    The Arduberry connects to the Raspberry Pi (all versions) and allows you to use the hundreds of shields and sensors already available for the Arduino with the ease of writing programs for the Raspberry Pi — in Python, Scratch and other higher level languages. 
    Support Raspberry pi 2 model B check here


    Sources : here

     
    Out Of Stock
    Rp.425,000
  • Raspberry Pi 3B,2B,B+ Case (ABS CLEAR + FAN )
    Package :
    1 x case abs
    1 x fan
    Out Of Stock
    Rp.110,000
  • Raspberry Pi Adapter (LA-530)
    Adapter untuk Raspberry Pi, CHIP, PINE64, Banan Pi semua tipe dengan Amper sebesar 3A dan tegangan kurang lebih 5V, ujung output micro usb dan input euro standard
    spesifikasi :
    • Input : 110V-240V 50/60 Hz , 0,3A
    • Output : 5V ~3A
    • Panjang kabel kurang lebih 1,5M
    Out Of Stock
    Rp.75,000
  • GPS Module Ublox ( NEO-6-MV2 )

    Description

    • GPS modules NEO-6M, 3V-5V power supply Universal
    • Model: GY-GPS6MV2
    • Destined module with ceramic antenna, signal super
    • Save the configuration parameter data EEPROM Down
    • With data backup battery
    • There are LED signal indicator
    • Antenna size 25 * 25mm
    • Module size 25mm * 35mm
    • Installation aperture 3mm
    • Default Baud Rate: 9600
    • Compatible with various flight control modules that provide GPS computer test software


    Package Content

    • 1 x GY-NEO6MV2 New GPS Module
    Add to Cart
    Rp.280,000
  • Raspberry pi Dragino Lora / GPS HAT (868 MHZ / 915 MHZ For Pi 2 B , 3 B)

    * mohon cantumkan tipe berdasarkan Freq (MHZ) yanga mau dipesan pada catatan order

    Lora Spec

    • 168 dB maximum link budget.
    • +20 dBm - 100 mW constant RF output vs.
    • +14 dBm high efficiency PA.
    • Programmable bit rate up to 300 kbps.
    • High sensitivity: down to -148 dBm.
    • Bullet-proof front end: IIP3 = -12.5 dBm.
    • Excellent blocking immunity.
    • Low RX current of 10.3 mA, 200 nA register retention.
    • Fully integrated synthesizer with a resolution of 61 Hz.
    • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
    • Built-in bit synchronizer for clock recovery.
    • Preamble detection.
    • 127 dB Dynamic Range RSSI.
    • Automatic RF Sense and CAD with ultra-fast AFC.
    • Packet engine up to 256 bytes with CRC.
    • Built-in temperature sensor and low battery indicator.

    GPS Spec

    • Based on MT3339.
    • Power Acquisition:25mA,Power Tracking:20mA.
    • Compliant with GPS, SBAS.
    • Programmable bit rate up to 300 kbps.
    • Serial Interfaces UART: Adjustable 4800~115200 bps,Default: 9600bps.
    • Update rate:1Hz (Default), up to10Hz.
    • I/O Voltage:2.7V ~ 2.9V.
    • Protocols:NMEA 0183,PMTK.
    • Horizontal Position Accuracy:Autonomous <2.5 m CEP.
    • TTFF@-130dBm with EASY™:Cold Start <15s,Warm Start <5s,Hot start <1s;TTFF@-130dBm.without EASY™:Cold Start <35s,Warm Start <30s,Hot Start <1s.
    • Timing Accuracy:1PPS out 10ns,Reacquisition Time <1s.
    • Velocity Accuracy Without aid <0.1m/s,Acceleration Accuracy Without aid 0.1m/s².
    • Sensitivity Acquisition -148dBm,Tracking -165dBm,Reacquisition -160dBm.
    • Environmental:Operating Temperature -40°C to 85°C,Storage Temperature -45°C to 125°C.
    • Dynamic Performance Altitude Max.18000m,Maximum Velocity Max.515m/s,Maximum Acceleration 4G.
    • L1 Band Receiver(1575.42MHz) Channel 22 (Tracking) /66 (Acquisition).


    Dimensions and Weight:

    • Size: 60mm*53mm*25mm.
    • Net weight: 30g.
    Featrues
    • Frequency Band: 868 MHZ/433 MHZ/915 MHZ(Pre-configure in factory)
    • Low power consumption
    • Compatible with Raspberry Pi 2 Model B/Raspberry Pi 3.
    • LoRa™ Modem
    • FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation
    • Preamble detection
    • Baud rate configurable
    • Built-in temperature sensor and low battery indicator
    • Excellent blocking immunity
    • Automatic RF Sense and CAD with ultra-fast AFC
    • Support DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN)
    • GPS automatic switching between internal patch antenna and external active antenna
    • PPS VS. NMEA can be used in time service
    • Support SDK command
    • Built-in LNA for better sensitivity
    • EASY™, advanced AGPS technology without external memory
    • AlwaysLocate™, an intelligent controller of periodic mode
    • GPS FLP mode, about 50% power consumption of normal mode
    • GPS support short circuit protection and antenna detection
    Sources : LoRa Wiki

    Packge list :
    • 1 x Lora/GPS HAT
    • 4 x Brass cylinders
    • 4 x Screws
    • 4 x Nuts
    • 1 x Glue Stick Antenna(868 MHZ, 915 MHZ depends on order)
    Add to Cart
    Rp.475,000
  • NanoPi NEO Air (with Heatsink - Allwinner H3 )
    Specification  :
    • CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    • RAM: 512MB DDR3 RAM
    • Storage: 8GB eMMC
    • WiFi: 802.11b/g/n
    • Bluetooth: 4.0 dual mode
    • MicroSD Slot x 1
    • GPIO: 2.54mm pitch 24pin. It includes UART, SPI, I2C, IO etc
    • PCB Size: 40 x 40mm
    • Power Supply: DC 5V/2A
    • OS/Software: u-boot, UbuntuCore
    Package list :
    - NanoPi NEO Air board
    - Heatsink
    Add to Cart
    Rp.350,000
  • PINE 64 ABS Enclosure (White )
    Note:
    1. There is no open hole to access microSD from outside.
    2. Current Zwave module cannot fit into the casing due to height concern.
    Add to Cart
    Rp.180,000
  • RPI Power Pack (Ver 1.1 for Raspberry Pi B+ , 2B, 3B )
    Features :
    • A power module especially designed for Raspberry Pi, which enables using the Raspberry Pi in a moveable manner
    • Battery capacity: 3800mAH (maximum); Output current: 1.8A
    • Output voltage (no load): 5.1V ± 0.1V
    • Double USB outputs, one for the Raspberry Pi, the other for the embedded LCD screen
    • Coming with fastening standoffs, screws and nut, so you can stack the Raspberry Pi board on the module
    Technical Details
    Introduction
    The power module is designed for the Raspberry Pi 3 Model B specially, allowing the master board to work offline for up to 9 hours. It's not only supplying for Raspberry Pi; this board has 2 USB type-A ports – one supplies power for the Raspberry Pi and the other for the embedded LCD screen.
    The module integrates a Li-ion battery charger IC, a boost management chip. And it is developed in strict accordance with the size of the international Raspberry Pi expansion board HAT, using only simple copper standoffs to install multi-layer Raspberry Pi boards.

    Specifications:
    Battery capacity: 3800mAH
    Maximum discharge current: 1.8A
    No-load output voltage: 5.1V ± 0.1V
    Standard charging current/voltage: 1.0A/5.0V
    Cut-off voltage of fully charging the Li-ion battery: 4.18V - 4.2V

    Package Content :
    • Lithium Battery Expansion board (with lithium battery)
    • 4 x Copper standoff
    • 4 x Screw
    • 4 x Nut
    • Power board unit

     
    Out Of Stock
    Rp.268,000
  • IC MCP3008
    This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. Uses SPI so only 4 pins are required.  this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.

    Data Sheet here

    Features :
    • 10-bit resolution
    • Eight single-ended channels
    • SPI interface
    • ±1 LSB DNL
    • ±1 LSB INL
    • 200 ksps sample rate at 5V
    • -40 to +85°C temperature range

     
    Add to Cart
    Rp.85,000
  • USB WIFI High Power (150M - W311MA)
    Hardware Features :
    Standards IEEE 802.11b/g/n
    Interface USB 2.0
    Antenna 1x3.5dBi external antenna, 2.4GHz
    Button WPS
    Dimensions (L*W*H)mm 39.1mm17.2mm12.6mm
    LED Displays a solid light while working properly; Flashes while transferring data

    Wireless Features :
    Wireless Speed Up to 150Mbps over 11n
    Frequency 2.4GHZ
    Channel 1~13
    Transmit Power 17dBm (Max)
    Operating Mode Infrastructure, Ad-Hoc
    Software Features
    Security 64-/128-bit WEP
    WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK WPS
    Compatible OS Windows 2000, Windows XP 32-/64-bit, Windows 7 32-/64-bit, Vista 32-/64-bit, Linux , MAC OS
    Others Connect PSP, WII and NDS to Internet and Xlink Kai

    Package Contents W311MA Installation CD
    Temperature Operating Temperature: 0 ~ 45;
    Storage Temperature: -40 ~ 70.
    Humidity Operating Humility:10% ~ 90% RH Non-condensing
    Storage Humility:3% ~ 90% RH Non-condensing
    Related Products W311R, W316R W311U+
    Certificates CE, FCC, RoHS

    chipset : Ralink RT3370
    Out Of Stock
    Rp.100,000
  • CHIP HDMI Adapter
    HDMI Adapter for CHIP board
    untuk penggunaan addon ini CHIP board harus kernel 4.4
    jadi perlu flashing dulu sistem di CHIP nya
    cara bisa dilihat disini > http://docs.getchip.com/chip.html#flash-chip-firmware
    Add to Cart
    Rp.345,000
  • Raspberry Pi 3B,2B,B+ Metal Case (Black with Fan)
    Metal box - Iron case for Raspberry Pi 3B, 2B adn B+ with Fan black Color
    Package included :
    • 1pcs metal box
    • 1pcs fan
    Out Of Stock
    Rp.165,000
  • Raspberry Pi to Arduino shields connection bridge
    Feature :
    • Suport ArduPi Library
    • Arduino all the I/O interfaces: i2C, SPI, UART, analog, digital, in Raspberry Pi.
    • Suport Raspberry pi B rev 2, A+, B+, 2B
    Sources : via Cookinghack and Sainsmart
    Out Of Stock
    Rp.475,000
  • Stepper Motor HAT (Ver 0.1 For Raspberry Pi A+, B+ , Pi2B)
    Function :
    1. 4 H-Bridges:provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 5VDC to 12VDC.
    2. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
    3. Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
    4. Up to 4 Channel 12-bit PWM/Servo(5V)
    5. OneInfrared Receiver(GPIO26)
    6. Big terminal block connectors to easily hook up wires (18-26AWG) and power
    7. Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
    8. Works best with Raspberry Pi model A+, B+, or Pi 2;
    *Raspberry PI, servo, stapper motor and whell not include

    Source : here
    Add to Cart
    Rp.420,000
  • L298N motor driver (Dual H Bridge DC Stepper)
    Double H bridge drive
    Chip: L298N
    Logical voltage: 5V
    Drive voltage: 5V-35V
    Logical current: 0mA-36mA
    Drive current: 2A (MAX single bridge)
    Storage temperature: -20 to +135
    Max power: 25W
    Weight: 30g
    Size: 43 x 43 x 27mm
    Add to Cart
    Rp.55,000
Per Page      21 - 40 of 50
Powered By AbanteCart
TOKOMINIKOMPUTER.COM © 2018
Back to top